LoRaWAN Data Registers

LoRaWAN

The following registers contain information with regards to the LoRaWAN Communication.

Descriptive Name	Address	R/W	Default	Comment
Status	0x96	R		Current join status of the device
LoRa Radio Module	0x97	R	SX126x	Semtech Module (SXxxx)
LoRa Region	0x98	R	EU868	Region Selected
LoRa Version	0x99	R	1.0.4	LoRaWAN Protocol Version
Device EUI	0x9A	R/W		The Device EUI
App EUI	0x9B	R/W		The APP EUI
App Key	0x9C	R/W		The Application Key
Application Port	0x9D	R/W		Default application port
Join Type	0x9E	R/W		OTAA, as of now all devices have only OTAA join possibility.
Class Type	0x9F	R/W		LoRaWAN Class (A,B,C)
ADR Mode	0xA0	R/W		Enable or Disable ADR Mode
Spread Factor	0xA1	R/W		Spread Factor to be used if ADR is disabled.
Rejoin	0xA2	W		Rejoin the device
Radio Mode	0xA3	R/W	0	Choose the Radio Operating Mode. 0 = LoRaWAN 1 = iQ D2D 2 = LoRaWAN and iQ D2D
Number of Join Attempts	0xA4	R/W	0	1 byte, Uint8 n = 0 : disabled (infinite) n > 0 : number of join attempts in the LinkCheckReq timeframe
Timeframe for LinkCheckReq	0xA5	R/W	24	2 bytes, Uint16 amount of hours in which the LinkCheckReq will take place.
Data Retransmission	0xA6	R/W	0	0 = Disabled 1 = Enabled
LoRa Communication Watchdog Alarm	0xA7	R		Returns the current alarm state of the LoRaWAN watchdog. 0 = No Alarm 1 = Alarm