Generic Device Data Registers
Generic Device Data
The following registers contain data with regards to the device.
Status
0x64
R
1 byte; Uint8 Status of the device.
Manufacturer
0x65
R
YOBIIQ B.V.
Returns the manufacturer of the device
OEM
0x66
R
YOBIIQ B.V.
Returns the name of the customer for which the OEM version was made
Model
0x67
R
Returns the model of the device
Serial Number
0x68
R
4 bytes; Uint32 Serial number of the device
Firmware Version
0x69
R
Returns the firmware version (2 bytes)
Hardware Version
0x6A
R
Returns the hardware version (2 bytes)
External Power Status
0x6B
R
1 byte; Uint8 0x00 : AC Not Present 0x01 : AC Present
Battery Voltage
0x6C
R
1 byte; Uint8 Battery Voltage x 10
Battery Percentage
0x6D
R
1 byte; Uint8 Battery percentage
Password
0x6E
R/W
Password for logging on the device using Toolbox (possibility to change password within Toolbox)
Restart
0x6F
W
Restart the device ( Write 0x01 to reboot the device)
Internal Temperature Sensor
The internal temperature sensor is fitted to protect the device against overheating, the temperature/humidity values are not considered to be usefull for any other means.
Temperature Error
0x78
R
Returns the current alarm state. 0 = No Error 1 = Error
Number of temperature alarms
0x79
R
4 bytes; Uint32 Saved in flash memory, non-resetable.
Internal Circuit Temperature
0x7A
R
2 bytes; Int16 Internal Circuit temperature x 100
Internal Circuit Humidity
0x7B
R
1 byte; Uint8 Internal Circuit Relative humidity
The temperature error is activated if the measured temperature or humidity exceeds the listed operation conditions.
Temperature and Humidity Sensor
Some of our devices are equipped with a Temperature and Humidity sensor to reflect ambient environment measurements.
Ambient Temperature
0x82
R
2 bytes; Int16 Ambient temperature measurement value x 100
Ambient Humidity
0x83
R
1 byte; Uint8 Ambient Relative humidity measurement value.
Last updated