💽Registers and Frames

In this section, you will find all registers and frames available on the device.

Generic Data

All devices manufactured by Yobiiq B.V. follow the same specification for generic data configuration, etc. This is done to have a consistent way of configuration and maintenance of our devices.

The device communication watchdog guards the communication between the LoRaWAN module and the device.

Descriptive name	Address	Toolbox	LoRaWAN	R/W	Default Value	Comment
Status	0x00	Yes	Yes	R		Current status of the device
Manufacturer	0x01	Yes	Yes	R		Returns the manufacturer of the device
Model	0x02	Yes	Yes	R		Returns the model of the device
Serial Number	0x03	Yes	Yes	R		Serial number of the device
Firmware Version	0x04	Yes	Yes	R		Returns the firmware version
Hardware Version	0x05	Yes	Yes	R		Returns the hardware version
External Power Status	0x06	Yes	Yes	R		Status (AC Present / Not Present)
Battery Voltage	0x07	Yes	Yes	R		Battery Voltage
Battery Percentage	0x08	Yes	Yes	R		Battery percentage
Restart	0x0a	Yes	Yes	W		Restart the device
LoRaWAN
Status	0x0b	Yes	No	R		Current join status of the device
DevEUI	0x0c	Yes	No	RW		The Device EUI
AppEUI	0x0d	Yes	No	RW		The APP EUI
AppKey	0x0e	Yes	No	RW		The Application Key
Application Port	0x0f	Yes	No	R	50	Default application port
Join Type	0x10	Yes	No	R	OTAA	OTAA, as of now all devices have only OTAA join possibility.
Class Type	0x11	Yes	No	R	C	LoRaWAN Class (A,B,C)
ADR Mode	0x12	Yes	Yes	RW	1	Enable or Disable ADR Mode
Spread Factor	0x13	Yes	Yes	RW	0	Spread Factor to be used if ADR is disabled.

Device Data

The device data registers contain the registers specific to the device.

Descriptive Name	Address	Type	Unit	Resolution	BLE	LoRaWAN
Low Battery Alarm	0x00	Int32			Yes	Yes
Fault Alarm	0x01	Int32			Yes	Yes
Smoke Alarm	0x03	Int32			Yes	Yes
Interconnect Alarm	0x04	Int32			Yes	Yes