Welcome
User Manual - iQ WMR
User Manual - iQ WMR
  • Introduction
  • About this document
  • DEVICE
    • Device Overview
      • Installation
    • Technical Specifications
      • Bluetooth Low Energy (BLE)
    • Physical Interfaces
      • Power Supply
    • Operation
      • Application Operation
    • Registers
      • Generic Data
      • Device Data
      • LoRaWAN Data
  • LoRaWAN
    • LoRaWAN Communication
      • Payloads
        • Uplinks
        • Downlinks
  • Support and Maintenance
    • Troubleshooting
    • Maintenance
    • Changelog
Powered by GitBook
On this page
  1. DEVICE
  2. Device Overview

Installation

Recommended Operating Conditions

The built-in environmental sensor shows best performance when operated within the recommended normal temperature and humidity range of 5 °C … 60 °C and 20 %RH … 80 %RH, respectively.

Long term exposure to conditions outside recommended normal range, especially at high relative humidity, may temporarily offset the RH signal (e.g. +3 %RH after 60 h at >80 %RH). After returning into the recommended normal temperature and humidity range the sensor will recover to within specifications by itself. Prolonged exposure to extreme conditions may accelerate ageing. To avoid contamination the conditions described in this document must be met.

PreviousDevice OverviewNextTechnical Specifications